Description

To install your flagpole into Ground
1. You need to first dig a hole – 450mm by 450 mm and 600 mm deep.
2. Next, you need to fill the hole with five full bags of ready-mixed concrete or until your hole is full.
3. Using the template provided by Adda, cast the foundation bolts in the place into the concrete whilst wet.
4. Leave the newly concreted hole for three whole days.
5. After three days you can stand the pole and securely bolt down with the foundation bolts.

To install your Flagpole onto pre-existing Concrete Slab.
1. Drill 4 Holes into Concrete based on Template provided by Adda.
2. Fill holes with Chemical Adhesive and Insert Bolts.
3. Once Dry you can Stand Pole & secure bolts down with the foundation bolts.

Please feel free to contact Adda Flagpoles for Help and Instructions when installing or have Added Install it for You.
Installation in Sydney start at $550 per In ground Pole or $330 per Chemical Adhesive Pole.

Note: we can only Provide a Warranty & Guarantee for poles installed by us or our agents, as we cannot guarantee third party work.